|
Construction Description:
Bottom Tu: Using 40 # bottoms brush 1 ~ 2 times.
Dosage: 0.1 ~ 0.2kg /m 2
fiberglass layer: roll with epoxy primer, laying fiberglass cloth, roll to completely infiltrate, dense. Can
Repeat this process to a thickness requirements.
Dosage: 0.2 ~ 0.5kg /m 2 · layer
in Tu: grinding, leveling, net absorption of dust, coated with epoxy paint brush batch.
Dosage: 0.1 ~ 0.2kg /m 2
side coating: epoxy material roller brush or trowel specific gravity until smooth and clean shave.
Dosage: 0.8 ~ 1.5kg /m 2 " Surface treatment: surface should be flat net, no debris, grease and dried
Bottom coating: anti-corrosion primer paint vinyl ester
in Tu: brushing vinyl ester corrosion middle paint, until the paint dries on the base surface to be polished and clean < /SPAN>
side coating: anti-corrosion paint with vinyl ester trowel 1-2 over
|
Third, the thickness of the floor
3.0 ~ 5.0mm
Scope
areas of high mechanical performance requirements, machinery factory, hardware factory, dock, driveway, car or aircraft repair plants, steel mills
four, Technical Specifications Item Unit Index
Drying time Surface dry h ≤ 4
pragmatic d ≤ 3
Compressive strength MPa ≥ 80
bending strength MPa ≥ 30
wear < BR> (750g/500r) g ≤ 0.02
pencil hardness H ≥ 2
Second, product characteristics
① solvent, 100% solids
② excellent wear and impact resistance of high mechanical strength
③
④ may need to be made a smooth surface or a non-slip surface
Data not found. Contact us please.
Data not found. Contact us please.
Smart card system
Wangwang
Wangwang
Pressure sand epoxy floor LM-505
